| Last Modified: 11-27-2007 | 1.6 F | |
| Service Category: General | Section: Specifications | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000118X04VX |
| Title: SPECIFICATIONS: STANDARD BOLT: HOW TO DETERMINE NUT STRENGTH (2008 LX570) | ||
HOW TO DETERMINE NUT STRENGTH
Nut Type
|
Present Standard Hexagon Nut |
Old Standard Hexagon Nut |
Class |
|
|---|---|---|---|
|
Cold Forging Nut |
Cutting Processed Nut |
||
No Mark |
- |
- |
4N |
|
No Mark (w/ Washer) |
No Mark (w/ Washer) |
No Mark |
5N (4T) |
|
- |
- |
6N |
|
- |
|
|
7N (5T) |
|
- |
- |
8N |
|
|
No Mark |
10N (7T) |
|
- |
- |
11N |
|
- |
- |
12N |
HINT:
- *: Nut with 1 or more marks on one side surface of the nut.
- Use a nut with the same nut strength classification number (or more) as the bolt strength classification number when tightening parts with a bolt and nut.
- Bolt = 4T
- Nut = 4N or more
Example:
|
|