| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Wiper/Washer | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000011OI00AX |
| Title: WIPER / WASHER: REAR WIPER RUBBER: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE REAR WIPER BLADE
|
(a) Raise the rear wiper blade to the position shown in the illustration until the meshing of the claw disengages with a clicking sound. NOTICE:
Be careful not to break the claw. |
(b) Pull the rear wiper blade straight away from the wiper arm toward the left side of the vehicle.
NOTICE:
Do not bend the rear wiper arm with the rear wiper blade removed, as the arm tip could damage the windshield surface.
2. REMOVE REAR WIPER RUBBER
|
(a) Pull the end of the wiper rubber protruding from the blade stopper as shown in the illustration and remove it. NOTICE:
Do not pull out the wiper rubber forcibly. Otherwise, the backing plates will be deformed or the blade claw will be damaged. HINT:
Pushing the rubber as shown in the illustration will allow it to be removed more easily. |
(b) Remove the 2 wiper rubber backing plates from the wiper rubber.
|
|