| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Drive Shaft/Propeller Shaft | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000001AMB009X |
| Title: DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE TRANSFER HEAT INSULATOR
|
(a) Remove the 4 bolts and insulator. |
2. REMOVE REAR PROPELLER SHAFT ASSEMBLY
(a) for Transfer Side:
|
(1) Place matchmarks on the propeller shaft flange and transfer flange. |
(2) Remove the 4 nuts and 4 washers.
(b) for Differential Side:
|
(1) Place matchmarks on the propeller shaft flange and rear differential flange. |
(2) Remove the 4 nuts, 4 bolts and 4 washers.
(c) Remove the rear propeller shaft.
|
|