| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Drivetrain | Section: Drive Shaft/Propeller Shaft | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000001AMC009X |
| Title: DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL REAR PROPELLER SHAFT
|
(a) Align the matchmarks on the propeller shaft flange and transfer flange. |
(b) Connect the propeller shaft with the 4 washers and 4 nuts.
Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)
|
(c) Align the matchmarks on the propeller shaft flange and differential flange. |
(d) Install the propeller shaft with the 4 bolts, 4 washers and 4 nuts.
Torque: 88 N·m (900 kgf·cm, 65 ft·lbf)
2. INSTALL TRANSFER HEAT INSULATOR
|
(a) Install the insulator with the 4 bolts. Torque: 30 N·m (306 kgf·cm, 22 ft·lbf) |
|
|