Home › Suspension › Suspension Control System › SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION
Last Modified: 11-27-2007 1.6 D
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: LX570 Doc ID: RM000001CU2006X
Title: SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION: DTC CHECK / CLEAR (2008 LX570)

DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG) and the Techstream on.

(c) Enter the following menus: Chassis / AHC / Trouble Codes.

(d) Read the DTCs by following the prompts on the Techstream screen.

(e) Refer to the Diagnostic Trouble Code Chart for DTC information SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL SUSPENSION: DIAGNOSTIC TROUBLE CODE CHART (2008 LX570) .

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG) and the Techstream on.

(c) Enter the following menus: Chassis / AHC / Trouble Codes.

(d) Clear DTCs.