| Last Modified: 11-27-2007 | 1.6 C | |
| Service Category: Brake | Section: Brake Control/Dynamic Control System | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000001DXF00JX |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: VEHICLE STABILITY CONTROL SYSTEM: DESCRIPTION (2008 LX570) | ||
|
DTC |
C1201/51 |
Engine Control System Malfunction |
DESCRIPTION
If trouble occurs in the engine control system, the ECM transmits the abnormality to the skid control ECU. The skid control ECU stores this DTC and prohibits the following controls:
- VSC
- A-TRAC
- CRAWL
- Hill-start Assist Control
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
C1201/51 |
A malfunction signal is received from the ECM. |
Engine control system |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK DTC (for Engine Control System) |
(a) Check if the engine control system DTC is output
.
Result
|
Result |
Proceed to |
|---|---|
|
DTC is not output. |
A |
|
DTC is output. |
B |
|
|
|