| Last Modified: 11-27-2007 | 1.6 N | |
| Service Category: Vehicle Exterior | Section: Door/Hatch | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000001J97008X |
| Title: DOOR / HATCH: BACK DOOR SUPPORT: DISPOSAL (2008 LX570) | ||
DISPOSAL
1. DISPOSE OF BACK DOOR STAY ASSEMBLY LH
|
(a) Horizontally fix the stay in a vise with the piston-rod pulled out. |
(b) Using a metal saw, gradually cut any area between A and B to release the gas.
Standard:
|
Area |
Specified Condition |
|---|---|
|
a |
150 mm (5.91 in.) |
|
b |
20 mm (0.787 in.) |
CAUTION:
As metal debris may be blown outward by the gas, you must:
- Wear protective glasses.
- Cover the area being cut.
NOTICE:
The gas inside the back door stay is colorless, odorless and harmless. As there is a possibility that metal debris could scatter, cover the back door stay with a piece of cloth or other material.
|
|