Home › Vehicle Interior › Heating/Air Conditioning › SMOG VENTILATION SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Heating/Air Conditioning
Model Year: 2008 Model: LX570 Doc ID: RM000001OXP00HX
Title: HEATING / AIR CONDITIONING: SMOG VENTILATION SENSOR: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL SMOG VENTILATION SENSOR



(a) Install the sensor with the bolt.

Torque: 9.8 N·m (100 kgf·cm, 87 in·lbf)

(b) Connect the connector.

2. INSTALL RADIATOR GRILLE ASSEMBLY EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

3. INSTALL UPPER RADIATOR SUPPORT SEAL EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

4. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

5. INSTALL ENGINE ROOM SIDE COVER RH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+