Home › Vehicle Interior › Heating/Air Conditioning › SMOG VENTILATION SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Heating/Air Conditioning
Model Year: 2008 Model: LX570 Doc ID: RM000001OXR00FX
Title: HEATING / AIR CONDITIONING: SMOG VENTILATION SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

2. REMOVE ENGINE ROOM SIDE COVER RH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

3. REMOVE UPPER RADIATOR SUPPORT SEAL EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

4. REMOVE RADIATOR GRILLE ASSEMBLY EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

5. REMOVE SMOG VENTILATION SENSOR



(a) Disconnect the connector.

(b) Remove the bolt and sensor.