Home › Audio/Visual/Telematics › Audio/Video › AUDIO AND VISUAL SYSTEM
Last Modified: 11-27-2007 1.6 J
Service Category: Audio/Visual/Telematics Section: Audio/Video
Model Year: 2008 Model: LX570 Doc ID: RM000001WW401EX
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: INSPECTION PROCEDURE (2008 LX570)

No Image Appears on Multi-display

INSPECTION PROCEDURE

PROCEDURE

1.

CHECK DISPLAY SETTING

(a) Check that the display is not in "Screen Off" mode.

OK:

The display setting is not in "Screen Off" mode.

OK

2.

CHECK IMAGE QUALITY SETTING

(a) Check that the screen color quality can be set.

OK:

Setting is possible.

OK

3.

CHECK CABIN

(a) Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.

HINT:

  • A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may short circuit the screen.
  • The appropriate cabin temperature is 20 to 30°C (68 to 86°F).

OK:

Condensation is not likely and temperature is not high or extremely low.

OK