Home › Brake › Brake Control/Dynamic Control System › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER
Last Modified: 11-27-2007 1.6 G
Service Category: Brake Section: Brake Control/Dynamic Control System
Model Year: 2008 Model: LX570 Doc ID: RM000001WYW00JX
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SKID CONTROL BUZZER: INSPECTION (2008 LX570)

INSPECTION

1. INSPECT SKID CONTROL BUZZER ASSEMBLY

(a) Apply battery voltage to the skid control buzzer and check that the buzzer sounds.

OK:

Measurement Condition

Specified Condition

Battery positive (+) voltage → Terminal 2

Battery negative (-) voltage → Terminal 1

Skid control buzzer sounds

If the result is not as specified, replace the skid control buzzer assembly.