| Last Modified: 11-27-2007 | 1.6 C | |
| Service Category: Suspension | Section: Tire Pressure Monitoring | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000026PN02GX |
| Title: TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING SYSTEM: DESCRIPTION (2008 LX570) | ||
|
DTC |
C2176/76 |
Receiver Error |
DESCRIPTION
This DTC is stored when referencing data becomes impossible due to an internal malfunction in the ECU.
|
DTC Code |
DTC Detection Condition |
Trouble Area |
|---|---|---|
|
C2176/76 |
When there is a malfunction in the tire pressure warning ECU internal circuit. |
Tire pressure warning ECU |
INSPECTION PROCEDURE
NOTICE:
- When replacing the tire pressure warning ECU, read the IDs stored in the old ECU using the Techstream and write them down before removal.
-
It is necessary to perform initialization
after registration
of the transmitter IDs into the tire pressure warning ECU after the ECU and/or the tire pressure warning valve and transmitter has been replaced.
PROCEDURE
|
1. |
CLEAR DTC |
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG) and the Techstream on.
(d) Clear the DTC
.
|
|
2. |
CHECK DTC |
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG) and the Techstream on.
(d) Check for DTC.
Result
|
Result |
Proceed to |
|---|---|
|
DTC C2176 is output |
A |
|
DTC C2176 is not output |
B |
|
|
|