| Last Modified: 11-27-2007 | 1.6 G | |
| Service Category: Drivetrain | Section: Axle/Differential | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000270Y008X |
| Title: AXLE AND DIFFERENTIAL: REAR AXLE SHAFT: INSPECTION (2008 LX570) | ||
INSPECTION
1. INSPECT REAR AXLE SHAFT LH
|
(a) Using a dial indicator, measure the rear axle shaft runout and flange runout. Maximum runout: Shaft runout 1.50 mm (0.0591 in.) Flange runout 0.05 mm (0.00197 in.) If the rear axle shaft or flange is damaged or worn, or if the runout is more than the maximum, replace the rear axle shaft. |
|
|