| Last Modified: 11-27-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000294H00GX |
| Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: INSPECTION PROCEDURE (2008 LX570) | ||
|
Disc cannot be Inserted or is Ejected Right After Insertion |
INSPECTION PROCEDURE
PROCEDURE
|
1. |
CHECK IF PROPER DISC IS INSERTED |
(a) Make sure that the disc is a normal audio disc, and that it is not deformed, flawed, burred or otherwise defective.
OK:
Normal audio disc.
HINT:
For details on playable discs, refer to the Owner's Manual.
|
|
2. |
CHECK THAT DISC IS INSERTED PROPERLY |
(a) Check whether or not the disc is inserted upside down.
OK:
Disc is properly inserted.
|
|
3. |
CLEAN DISC |
|
(a) Clean the disc by wiping the disc underside radially with a soft cloth. OK: Malfunction disappears. NOTICE:
Do not use a conventional record cleaner or antistatic preservative. |
|
|
4. |
REPLACE DISC WITH ANOTHER AND RECHECK |
(a) Replace the disc with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
|
|
|