| Last Modified: 11-27-2007 | 1.6 G | |
| Service Category: Engine/Hybrid System | Section: Emission Control | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000029LL00PX |
| Title: 3UR-FE EMISSION CONTROL: PCV VALVE: INSPECTION (2008 LX570) | ||
INSPECTION
1. INSPECT PCV VALVE SUB-ASSEMBLY
|
(a) Install a clean hose to the PCV valve. |
(b) Check the PCV valve operation.
(1) Blow air into the cylinder head side, and check that air passes through easily.
CAUTION:
Do not suck air through the valve.
Petroleum substances inside the valve are hazardous to your health.
|
(2) Blow air into the intake manifold side, and check that air passes through with difficulty. If the result is not as specified, replace the PCV valve sub-assembly. |
(c) Remove the hose from the PCV valve.
|
|