| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Wiper/Washer | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002M6E008X |
| Title: WIPER / WASHER: FRONT WIPER RUBBER: INSTALLATION (2008 LX570) | ||
INSTALLATION
HINT:
- Use the same procedures for both the RH and LH side.
- The procedures listed below are for the LH side.
1. INSTALL WIPER RUBBER LH
|
(a) Install the 2 backing plates to the rubber. NOTICE:
Make sure the backing plates are facing the proper direction. |
|
(b) Install the wiper rubber to the claw of the wiper blade in the direction indicated by the arrow in the illustration. HINT:
Install the wiper rubber so that the head part (large side) of the wiper rubber faces the arm axle side. |
(c) Attach the head part (large side) of the wiper rubber to the rear end side claw of the wiper blade.
HINT:
Push the wiper blade into the grooves of the wiper rubber to attach it completely.
2. INSTALL FRONT WIPER BLADE LH
|
(a) Install the wiper blade as shown in the illustration. |
|
|