Home › Vehicle Interior › Theft Deterrent/Keyless Entry › ELECTRICAL KEY OSCILLATOR (for Luggage Compartment)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Theft Deterrent/Keyless Entry
Model Year: 2008 Model: LX570 Doc ID: RM000002QFY00DX
Title: THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Luggage Compartment): REMOVAL (2008 LX570)

REMOVAL

1. REMOVE REAR NO. 2 SEAT ASSEMBLY

(a) Remove the rear No. 2 seat assembly SEAT: REAR NO. 2 SEAT ASSEMBLY (w/ Automatic Folding-up Function): REMOVAL (2008 LX570) .

2. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

(a) Remove the front quarter trim panel LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 LX570)+ .

3. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH

(a) Remove the front quarter trim panel RH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 LX570)+ .

4. REMOVE NO. 3 SEAT CUSHION COVER SEAT: REAR NO. 2 SEAT ASSEMBLY (w/ Automatic Folding-up Function): REMOVAL (2008 LX570)+

5. REMOVE INDOOR ELECTRICAL KEY OSCILLATOR



(a) Fold back the rear floor carpet assembly.

(b) Disconnect the connector.

(c) Remove the bolt and electrical key oscillator.