GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL (2008 LX570)

Home › Audio/Visual/Telematics › Garage Door Opener › GARAGE DOOR OPENER TRANSMITTER

Last Modified: 11-27-2007		1.6 A
Service Category: Audio/Visual/Telematics	Section: Garage Door Opener
Model Year: 2008	Model: LX570	Doc ID: RM000002TR8005X
Title: GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

w/ Navigation System:

After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

When disconnecting the cable, some systems need to be initialized after the cable is reconnected .

3. REMOVE MAP LIGHT ASSEMBLY

(a) Remove the map light .

4. REMOVE GARAGE DOOR OPENER TRANSMITTER

(a) Disconnect the connector.

(b) Remove the 2 screws and garage door opener transmitter.