Home › Audio/Visual/Telematics › Navigation/Multi Info Display › NAVIGATION SYSTEM
Last Modified: 11-27-2007 1.6 J
Service Category: Audio/Visual/Telematics Section: Navigation/Multi Info Display
Model Year: 2008 Model: LX570 Doc ID: RM000002TSO003X
Title: NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: INSPECTION PROCEDURE (2008 LX570)

Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

INSPECTION PROCEDURE

PROCEDURE

1.

CHECK SATELLITE RADIO

(a) Check the radio condition.

Result

Result

Proceed to

Broadcast cannot be selected

A

Broadcast can be selected, but selection cannot be memorized

B
A

2.

CHECK CONTRACT CONDITIONS

(a) Check if the pay-type contract has been extended, or if the contract period has ended.

OK:

Pay-type contract is valid.

OK

3.

PERFORM ACTIVATION REFRESH

(a) Perform activation refresh.

HINT:

Refer to the satellite radio tuner company web site. (http://www.xmradio.com/refresh/)

OK:

Malfunction disappears.

OK

4.

CHECK DISPLAY

(a) Check the display screen.

Result

Result

Proceed to

"OFF AIR" is displayed

A

After "---" is displayed, display automatically switches to CH001

B

Other

C
C

5.

CHECK DTC

(a) Check for DTCs.

Result

Result

Proceed to

"C0-16" is not output

A

"C0-16" is output

B
A

6.

CHECK SATELLITE RADIO

(a) Check if all preset channels have been cleared.

Result

Result

Proceed to

Preset channels are not cleared.

A

Preset channels are all cleared.

B
A

7.

ADD PRESET CHANNEL INTO MEMORY AGAIN

(a) Check if the preset channels that have been cleared can be added into memory again.

OK:

Preset channels can be added into memory.

OK

8.

CHECK BATTERY

(a) Check if the battery was replaced.

OK:

Battery was not replaced.

OK

9.

CHECK DTC

(a) Check for DTCs.

Result

Result

Proceed to

"C0-16" is not output

A

"C0-16" is output

B
A