| Last Modified: 11-27-2007 | 1.6 J | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002TT0004X |
| Title: AUDIO / VIDEO: REAR SEAT ENTERTAINMENT SYSTEM: INSPECTION PROCEDURE (2008 LX570) | ||
|
Television Display Screen is not Stabilized |
INSPECTION PROCEDURE
HINT:
If the vehicle has a navigation system, "multi-display" refers to the "display and navigation module display".
PROCEDURE
|
1. |
CHECK MODE IN WHICH SCREEN IS NOT STABILIZED |
(a) Check the mode in which the screen is not stabilized.
Result
|
Result |
Proceed to |
|---|---|
|
Only during VTR image |
A |
|
Not stabilized in all modes |
B |
|
Multi-display also is not stabilized during DVD image only |
C |
|
Navigation image is displayed on multi-display, but television display has no image or image is not stabilized |
D |
|
|
2. |
CHECK NTSC/PAL SIGNAL (RSE IMAGE QUALITY ADJUSTMENT SCREEN) |
|
(a) During the VTR image, check if changing the NTSC/PAL signal by pressing the remote controller DISPLAY switch, entering the RSE image adjustment screen, and pressing the PAL VIDEO button returns the image to normal. OK: Returned to normal after pressing PAL VIDEO button. |
|
|
3. |
CHECK VEHICLE SIGNAL (DISPLAY CHECK MODE) |
|
(a) Enter the "Display Check" mode (Vehicle Signal Check Mode)
|
(b) Check that the display changes between ON and OFF according to the light control switch operation.
OK:
|
Light Control Switch |
Display |
|---|---|
|
Tail or on |
ON |
|
Off |
OFF |
HINT:
The display is updated once per second. As a result, it is normal for the display to lag behind the actual change in the switch.
|
|
|