| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Fuel System | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000002Z80009X |
| Title: 3UR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
|
(a) Set the sender gauge to the fuel sub-tank. Then slide the sender gauge downward to install it. |
|
(b) Connect the fuel sender gauge connector. |
2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Install the fuel suction with pump and gauge tube assembly
.
|
|