Home › Vehicle Interior › Heating/Air Conditioning › AIR CONDITIONING PRESSURE SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Heating/Air Conditioning
Model Year: 2008 Model: LX570 Doc ID: RM0000030JI005X
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING PRESSURE SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE FRONT BUMPER COVER

(a) Remove the front bumper cover EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 LX570) .

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM HEATING / AIR CONDITIONING: REFRIGERANT: REPLACEMENT (2008 LX570)+

3. REMOVE AIR CONDITIONER PRESSURE SENSOR



(a) Disconnect the connector.

(b) Remove the pressure sensor.

(c) Remove the O-ring from the pressure sensor.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.