PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570)

Home › Audio/Visual/Telematics › Park Assist/Monitoring › INTUITIVE PARKING ASSIST SYSTEM

Last Modified: 11-27-2007		1.6 D
Service Category: Audio/Visual/Telematics	Section: Park Assist/Monitoring
Model Year: 2008	Model: LX570	Doc ID: RM0000035BH002X
Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570)

CUSTOMIZE PARAMETERS

1. CUSTOMIZE PARAMETERS

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(d) Enter the following menus: Customize Setting.

(e) Select the setting by referring to the table below.

Display	Default	Contents	Setting
Rr Sensor Onset Range	Wide	Sets the buzzer activation range for the rear sensors.	Narrow or Wide
Keep Sense Buzzer	Avail	Makes the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.	Not Avail or Avail
Fr & Rr Buzzer Volume	H	Changes the buzzer volume setting.	L, M1, M2, M3 or H

Display	Default	Contents	Setting
Sensor Condition N	Avail	Makes the sensors available when the shift lever is in N.	Not Avail or Avail
Reverse Range Front Sensor	F	Changes the operation setting for the vehicle front sensors when the shift lever is in R.	F or F Stop
Non P/R Range Rear Sensor	R Stop	Changes the operation setting for the vehicle rear sensors when the shift lever is not in P or R.	R, Rcrn or R Stop

Display	Default	Contents	Setting
Approach Display OFF	Avail	The display when moving away from a previously detected obstacle.	Not Avail or Avail
Display Mode	All	The display mode setting (when the intuitive parking assist system is normal).	All or Undisp