| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Exterior Panels/Trim | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000038K9002X |
| Title: EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REASSEMBLY (2008 LX570) | ||
REASSEMBLY
w/o Dynamic Radar Cruise Control System:
HINT:
When installing the emblem, heat the radiator grille and emblem using a heat light.
Standard:
|
Item |
Temperature |
|---|---|
|
Radiator Grille |
20 to 30°C (68 to 86°F) |
|
Emblem |
20 to 30°C (68 to 86°F) |
NOTICE:
Do not heat the radiator grille and emblem excessively.
1. INSTALL FRONT TELEVISION CAMERA ASSEMBLY (w/ Wide View Front Monitor System)
2. INSTALL NO. 3 RADIATOR GRILLE GARNISH (w/o Dynamic Radar Cruise Control System)
(a) Attach the claw to install the garnish.
(b) Install 2 new spring nuts.
3. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/o Dynamic Radar Cruise Control System)
(a) Clean the radiator grille surface.
(1) Using a heat light, heat the radiator grille surface.
(2) Remove the double-sided tape from the radiator grille.
(3) Wipe off any tape adhesive residue with cleaner.
(b) Install a new emblem.
(1) Using a heat light, heat the radiator grille and a new emblem.
(2) Remove the peeling paper from the face of the emblem.
HINT:
After removing the peeling paper, keep the exposed adhesive free from foreign matter.
|
(3) Align the boss positions and install the emblem. HINT:
Press the emblem firmly to install it. |
4. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control System)
(a) Attach the claw to install the garnish.
(b) Install 2 new spring nuts.
5. INSTALL UPPER RADIATOR SEAL
(a) Attach the 14 clips to install the radiator seal.
|
|