Home Vehicle Interior Lighting (int) VANITY LIGHT
Last Modified: 11-27-2007 1.6 G
Service Category: Vehicle Interior Section: Lighting (int)
Model Year: 2008 Model: LX570 Doc ID: RM0000038V7002X
Title: LIGHTING (INT): VANITY LIGHT: INSPECTION (2008 LX570)

INSPECTION

1. INSPECT VISOR ASSEMBLY RH (VANITY LIGHT)


(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 (SW) - 1 (GND)

Visor raised

10 kΩ or higher

2 (SW) - 1 (GND)

Visor lowered and mirror cover closed

10 kΩ or higher

2 (SW) - 1 (GND)

Visor lowered and mirror cover open

Below 1 Ω

If the result is not as specified, there may be a malfunction in the visor assembly.

2. INSPECT VISOR ASSEMBLY LH (VANITY LIGHT)


(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

2 (SW) - 1 (GND)

Visor raised

10 kΩ or higher

2 (SW) - 1 (GND)

Visor lowered and mirror cover closed

10 kΩ or higher

2 (SW) - 1 (GND)

Visor lowered and mirror cover open

Below 1 Ω

If the result is not as specified, there may be a malfunction in the visor assembly.