Home › Vehicle Exterior › Lighting (ext) › REAR COMBINATION LIGHT ASSEMBLY
Last Modified: 11-27-2007 1.6 G
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: LX570 Doc ID: RM0000038WP002X
Title: LIGHTING (EXT): REAR COMBINATION LIGHT ASSEMBLY: INSPECTION (2008 LX570)

INSPECTION

1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

(a) Check the stop light.

(1) Apply battery voltage to the connector, and check the LED illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → 4 (STOP)

Battery negative (-) → 6 (E)

LED illuminates

If the result is not as specified, replace the rear combination light.

(b) Check the taillight.

(1) Apply battery voltage to the connector, and check the LED illumination condition.

OK:

Measurement Condition

Specified Condition

Battery positive (+) → 3 (TAIL)

Battery negative (-) → 6 (E)

LED illuminates

If the result is not as specified, replace the rear combination light assembly.