Home › Vehicle Exterior › Lighting (ext) › HEADLIGHT ASSEMBLY
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: LX570 Doc ID: RM0000038X4002X
Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: REPAIR (2008 LX570)

REPAIR

1. INSTALL UPPER HEADLIGHT PROTECTOR RETAINER LH

HINT:

  • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  • Ensure that the headlight is not damaged.


(a) Cut off the part shaded in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

(b) Install the headlight protector retainer with the 2 screws.

2. INSTALL LOWER HEADLIGHT PROTECTOR RETAINER LH

HINT:

  • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  • Ensure that the headlight is not damaged.


(a) Cut off the part shaded in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

(b) Install the headlight protector retainer with the 2 screws.

3. INSTALL UPPER LH HEADLIGHT PROTECTOR RETAINER LH

HINT:

  • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  • Ensure that the headlight is not damaged.


(a) Cut off the part shaded in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

(b) Install the headlight protector retainer with the 2 screws.

4. INSTALL LOWER LH HEADLIGHT PROTECTOR RETAINER LH

HINT:

  • If the installation area of the headlight is damaged, use the supply retainer for low-cost repair.
  • Ensure that the headlight is not damaged.


(a) Cut off the part shaded in the illustration and smooth with sandpaper.

NOTICE:

After cutting off the part, place the headlight protector retainer against the bosses and gradually file away the old bracket if it interferes with the installation of the supply retainer.

(b) Install the headlight protector retainer with the screw.