Home › Vehicle Interior › Seat › LUMBAR SWITCH
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat
Model Year: 2008 Model: LX570 Doc ID: RM00000394R002X
Title: SEAT: LUMBAR SWITCH: REMOVAL (2008 LX570)

REMOVAL

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

1. REMOVE ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

2. REMOVE FRONT SEAT ASSEMBLY LH

(a) Remove the front seat assembly SEAT: FRONT SEAT ASSEMBLY: REMOVAL (2008 LX570) .

3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB SEAT: FRONT SEAT ASSEMBLY: DISASSEMBLY (2008 LX570)+

4. REMOVE RECLINING POWER SEAT SWITCH KNOB SEAT: FRONT SEAT ASSEMBLY: DISASSEMBLY (2008 LX570)+

5. REMOVE FRONT SEAT CUSHION SHIELD LH SEAT: FRONT SEAT ASSEMBLY: DISASSEMBLY (2008 LX570)+

6. REMOVE LUMBAR SWITCH



(a) Remove the 2 screws and switch.