| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Seat | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM00000395O003X |
| Title: SEAT: POWER SEAT SWITCH (for 60/40 Split Seat Type 60 Side): INSTALLATION (2008 LX570) | ||
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
1. INSTALL REAR POWER SEAT SWITCH
(a) Install the power seat switch with the 2 screws.
2. INSTALL REAR UNDER SIDE COVER LH
3. INSTALL REAR SEATBACK STAY COVER LH
4. INSTALL SEAT BELT ANCHOR COVER CAP
5. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
6. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
7. INSTALL REAR NO. 2 SEAT PROTECTOR
8. INSTALL REAR NO. 2 SEAT LEG SIDE COVER
9. INSTALL UPPER SEAT TRACK RAIL COVER RH
10. INSTALL UPPER SEAT TRACK RAIL COVER LH
11. INSTALL REAR NO. 1 SEAT RECLINING COVER RH
12. INSTALL REAR NO. 1 SEAT RECLINING COVER LH
13. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
14. INSTALL SEAT ADJUSTER BOLT COVER
15. INSTALL REAR NO. 1 SEAT ASSEMBLY
(a) Install the rear No. 1 seat assembly
.
|
|