| Last Modified: 11-27-2007 | 1.6 G | |
| Service Category: Engine/Hybrid System | Section: Lubrication | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM0000039KW001X |
| Title: 3UR-FE LUBRICATION: OIL LEVEL SENSOR: INSPECTION (2008 LX570) | ||
INSPECTION
1. INSPECT ENGINE OIL LEVEL SENSOR
(a) Partially immerse the sensor in an oil bath and warm up the oil bath.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
1 - 2 |
ON, 20°C (68°F) |
Below 1 Ω |
|
OFF, 20°C (68°F) |
||
|
ON, 60°C (140°F) |
||
|
OFF, 60°C (140°F) |
10 kΩ or higher |
If the result is not as specified, replace the sensor.
|
|