Home › Engine/Hybrid System › Cruise Control › MILLIMETER WAVE RADAR SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cruise Control
Model Year: 2008 Model: LX570 Doc ID: RM0000039QN001X
Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Install the sensor with the 3 bolts.

Torque: 5.5 N·m (56 kgf·cm, 49 in·lbf)

(b) Connect the sensor connector.

NOTICE:

Do not use a sensor which has been dropped or subjected to any strong shocks.

2. INSTALL RADIATOR GRILLE ASSEMBLY EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

3. INSTALL UPPER RADIATOR SUPPORT SEAL EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

4. INSTALL ENGINE ROOM SIDE COVER RH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

5. INSTALL ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: INSTALLATION (2008 LX570)+

6. ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: ADJUSTMENT (2008 LX570)+

7. PERFORM DRIVE TEST CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: ADJUSTMENT (2008 LX570)+