Home › Engine/Hybrid System › Cruise Control › MILLIMETER WAVE RADAR SENSOR
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Cruise Control
Model Year: 2008 Model: LX570 Doc ID: RM0000039QP001X
Title: CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE ENGINE ROOM SIDE COVER LH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

2. REMOVE ENGINE ROOM SIDE COVER RH EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

3. REMOVE UPPER RADIATOR SUPPORT SEAL EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

4. REMOVE RADIATOR GRILLE ASSEMBLY EXTERIOR PANELS / TRIM: RADIATOR GRILLE: REMOVAL (2008 LX570)+

5. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

(a) Disconnect the sensor connector.

(b) Remove the 3 bolts and sensor.