|
Last Modified: 11-27-2007 |
1.6 G |
|
Service Category: Suspension |
Section: Suspension Control System |
|
Model Year: 2008 |
Model: LX570 |
Doc ID: RM000003A00002X |
|
Title: SUSPENSION CONTROL: DAMPING FORCE CONTROL ACTUATOR (for Front Side): INSPECTION (2008 LX570) |
INSPECTION
1. INSPECT FRONT SHOCK ABSORBER CONTROL VALVE ASSEMBLY (DAMPING FORCE CONTROL ACTUATOR)
|
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
for RH
|
Tester Connection
|
Condition
|
Specified Condition
|
|
1 (FAR+) - 2 (E FR)
|
Always
|
12.0 to 13.6 Ω
|
|
3 (FBR-) - 2 (E FR)
|
|
4 (FAR-) - 2 (E FR)
|
|
5 (FBR+) - 2 (E FR)
|
for LH
|
Tester Connection
|
Condition
|
Specified Condition
|
|
1 (FAL+) - 2 (E FL)
|
Always
|
12.0 to 13.6 Ω
|
|
3 (FBL-) - 2 (E FL)
|
|
4 (FAL-) - 2 (E FL)
|
|
5 (FBL+) - 2 (E FL)
|
If the result is not as specified, replace the shock absorber control valve assembly.
|
2. INSPECT FRONT SUSPENSION CONTROL VALVE ASSEMBLY (FRONT SPRING RATE SWITCHING VALVE)
|
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
for RH
|
Tester Connection
|
Condition
|
Specified Condition
|
|
1 (CRFR) - 2 (SLB)
|
20°C (68°F)
|
4.58 to 5.02 Ω
|
for LH
|
Tester Connection
|
Condition
|
Specified Condition
|
|
1 (CRFL) - 2 (SLB)
|
20°C (68°F)
|
4.58 to 5.02 Ω
|
If the result is not as specified, replace the front suspension control valve assembly.
|
|