| Last Modified: 11-27-2007 | 1.6 G | |
| Service Category: Vehicle Exterior | Section: Window/Glass | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003A7K003X |
| Title: WINDOW / GLASS: RELAY (for Windshield Deicer): ON-VEHICLE INSPECTION (2008 LX570) | ||
ON-VEHICLE INSPECTION
1. REMOVE DEICER RELAY
(a) Remove the deicer relay from the engine room relay block.
2. INSPECT DEICER RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Battery voltage is not applied to terminals 1 and 2 |
10 kΩ or higher |
|
3 - 5 |
Battery voltage is applied to terminals 1 and 2 |
Below 1 Ω |
If the result is not as specified, replace the relay.
3. INSTALL DEICER RELAY
(a) Install the deicer relay to the engine room relay block.
|
|