| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Audio/Visual/Telematics | Section: Audio/Video | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003AE1002X |
| Title: AUDIO / VIDEO: AMPLIFIER ANTENNA: REMOVAL (2008 LX570) | ||
REMOVAL
1. REMOVE ENGINE ROOM SIDE COVER LH
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected
.
3. REMOVE ROOF HEADLINING ASSEMBLY
(a) Remove the roof headlining
.
4. REMOVE NO. 2 REAR ROOF AIR DUCT
|
(a) Remove the 2 clips and duct. |
5. REMOVE NO. 5 REAR ROOF AIR DUCT
|
(a) Remove the 2 clips and duct. |
6. REMOVE NO. 4 REAR ROOF AIR DUCT
|
(a) Remove the 2 clips and duct. |
7. REMOVE NO. 3 REAR ROOF AIR DUCT
|
(a) Remove the clip and duct. |
8. REMOVE NO. 1 REAR ROOF AIR DUCT
|
(a) Remove the 3 clips and duct. |
9. REMOVE AMPLIFIER ANTENNA ASSEMBLY
(a) Disconnect the 3 connectors and remove the 2 bolts.
(b) Detach the 9 clamps and remove the antenna.
|
|