| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003AXT007X |
| Title: HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: REASSEMBLY (2008 LX570) | ||
REASSEMBLY
1. INSTALL FRONT EVAPORATOR TEMPERATURE SENSOR
NOTICE:
If reusing the evaporator, do not insert the sensor at a location where the sensor was previously inserted.
(a) Insert the sensor at a location that is 1 fin to the right or left of its previous location.
Standard:
|
Area |
Specified Condition |
|---|---|
|
a |
50 mm (1.97 in.) |
|
b |
34.3 mm (1.35 in.) |
|
c |
20.9 mm (0.822 in.) |
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
3. INSTALL SERVO MOTOR
4. INSTALL SERVO MOTOR
5. INSTALL SERVO MOTOR
6. INSTALL REAR AIR MIX DAMPER CONTROL SERVO MOTOR RH
7. INSTALL COOLER EXPANSION VALVE (w/o Cool Box)
8. INSTALL AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (w/ Cool Box)
9. INSTALL COOLER EXPANSION VALVE (w/ Cool Box)
10. INSTALL AIR CONDITIONING RADIATOR ASSEMBLY
11. INSTALL AIR CONDITIONER HARNESS
12. INSTALL QUICK HEATER ASSEMBLY (w/ PTC Heater)
13. INSTALL COOL BOX LIQUID TUBE (w/ Cool Box)
14. INSTALL ASPIRATOR
15. INSTALL NO. 4 AIR DUCT SUB-ASSEMBLY
16. INSTALL NO. 5 AIR DUCT SUB-ASSEMBLY
17. INSTALL BLOWER ASSEMBLY
|
|