Home › Suspension › Suspension Control System › SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Rear Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: LX570 Doc ID: RM000003BJ9001X
Title: SUSPENSION CONTROL: HEIGHT CONTROL SENSOR (for Rear Side): REMOVAL (2008 LX570)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .

2. REMOVE REAR WHEEL

3. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

(a) Disconnect the connector and 2 clamps.

(b) Remove the 2 bolts, nut and sensor.

4. REMOVE REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY RH

(a) Disconnect the connector and 2 clamps.

(b) Remove the 2 bolts, nut and sensor.