Home › Vehicle Interior › Seat Belt › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side)
Last Modified: 11-27-2007 1.6 A
Service Category: Vehicle Interior Section: Seat Belt
Model Year: 2008 Model: LX570 Doc ID: RM000003C4F002X
Title: SEAT BELT: REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side): INSTALLATION (2008 LX570)

INSTALLATION

1. CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH



(a) Connect the belt anchor.

NOTICE:

Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

2. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH



(a) Install the belt with the bolt.

Torque: 42 N·m (4287 kgf·cm, 31 ft·lbf)

NOTICE:

Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

HINT:

The No. 1 seat 3 point type belt anchor is fixed with the same bolt as the rear No. 1 seat inner belt LH. Therefore, connect it when installing the rear No. 1 seat inner belt LH.

3. INSTALL REAR SEAT UNDER TRAY COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

4. INSTALL REAR SEAT CUSHION COVER RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

5. INSTALL REAR UNDER SIDE COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

6. INSTALL REAR SEATBACK STAY COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

7. INSTALL SEAT BELT ANCHOR COVER CAP SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

8. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

9. INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

10. INSTALL REAR NO. 2 SEAT PROTECTOR SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

11. INSTALL REAR NO. 2 SEAT LEG SIDE COVER SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

12. INSTALL UPPER SEAT TRACK RAIL COVER RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

13. INSTALL UPPER SEAT TRACK RAIL COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

14. INSTALL REAR NO. 1 SEAT RECLINING COVER RH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

15. INSTALL REAR NO. 1 SEAT RECLINING COVER LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

16. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

17. INSTALL SEAT ADJUSTER BOLT COVER SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): REASSEMBLY (2008 LX570)+

18. INSTALL REAR NO. 1 SEAT ASSEMBLY LH

(a) Install the rear No. 1 seat assembly SEAT: REAR NO. 1 SEAT ASSEMBLY (for LH Side): INSTALLATION (2008 LX570) .

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .