| Last Modified: 11-27-2007 | 1.6 A | |
| Service Category: Suspension | Section: Rear Suspension | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003DGG001X |
| Title: REAR SUSPENSION: REAR STABILIZER BAR: INSTALLATION (2008 LX570) | ||
INSTALLATION
1. INSTALL STABILIZER LINK SUB-ASSEMBLY LH
|
(a) Install the stabilizer link to the stabilizer bar with the bolt and nut. Torque: 48 N·m (489 kgf·cm, 35 ft·lbf) |
|
(b) Install the bracket with the 2 retainers, 2 cushions and nut. Torque: 12 N·m (122 kgf·cm, 9 ft·lbf) |
2. INSTALL STABILIZER LINK SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
3. INSTALL REAR STABILIZER BAR SUB-ASSEMBLY
(a) Install the 2 rear stabilizer bushes to the rear stabilizer bar.
(b) Install the rear stabilizer bar.
4. INSTALL REAR STABILIZER BRACKET LH
|
(a) Install the stabilizer bar bracket with the 2 bolts. Torque: 56 N·m (571 kgf·cm, 41 ft·lbf) |
5. INSTALL REAR STABILIZER BRACKET RH
HINT:
Use the same procedures described for the LH side.
6. CONNECT REAR STABILIZER END BRACKET LH
|
(a) Connect the stabilizer end bracket with the 2 bolts. Torque: 36 N·m (367 kgf·cm, 27 ft·lbf) |
7. CONNECT REAR STABILIZER END BRACKET RH
HINT:
Use the same procedures described for the LH side.
8. INSTALL REAR WHEEL
Torque: 131 N·m (1336 kgf·cm, 97 ft·lbf)
|
|