1. REMOVE REAR WHEEL

2. DISCONNECT REAR STABILIZER END BRACKET LH

(a) Remove the 2 bolts and disconnect the stabilizer end bracket.

3. DISCONNECT REAR STABILIZER END BRACKET RH

HINT:

Use the same procedures described for the LH side.

4. REMOVE REAR STABILIZER BRACKET LH

(a) Remove the 2 bolts and bracket.

5. REMOVE REAR STABILIZER BRACKET RH

HINT:

Use the same procedures described for the LH side.

6. REMOVE REAR STABILIZER BAR SUB-ASSEMBLY

(a) Remove the rear stabilizer bar from the vehicle.

(b) Remove the 2 rear stabilizer bushes from the rear stabilizer bar.

7. REMOVE STABILIZER LINK SUB-ASSEMBLY LH

(a) Remove the nut, 2 retainers, 2 cushions and bracket from the stabilizer link.

(b) Remove the nut, bolt and stabilizer link.

8. REMOVE STABILIZER LINK SUB-ASSEMBLY RH

HINT:

Use the same procedures described for the LH side.