| Last Modified: 11-27-2007 | 1.6 D | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003DZ2002X |
| Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Customize Setting.
(e) Select the setting by referring to the table below.
Air Conditioner
|
Display |
Default |
Contents |
Setting |
|---|---|---|---|
|
Set Temperature Shift |
Normal |
Function to set the temperature shift. |
+2 C/+1 C/Normal/-1 C/-2 C |
|
Evaporator Control |
Automatic |
Function to set the evaporator control to the automatic position (Automatic) to save power, or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up. |
Manual/Automatic |
|
Compressor/Air Inlet DEF operation |
Link |
Function to automatically turn the A/C on when the front defroster button is pressed. |
Normal/Link |
|
Compressor Mode |
Automatic |
Function to turn the A/C on automatically by pressing the AUTO button when the blower is on and the A/C is off. |
Manual/Automatic |
|
Air Inlet Mode |
Automatic |
Function to automatically change to recirculation mode when the A/C is turned on. |
Manual/Automatic |
|
Foot/DEF Auto Mode |
ON |
Function to turn on the airflow from the front and rear footwell register ducts and center and side defrosters automatically when auto mode is on. |
ON/OFF |
|
Foot/DEF Automatic Blow Up Function |
ON |
Function to change the blower level automatically when the defroster is on. |
ON/OFF |
|
Ambient Temperature Shift |
Normal |
Function to control the shifted ambient temperature in relation to the displayed ambient temperature. |
+3 C/+2 C/+1 C/Normal/-1 C/-2 C/-3 C |
|
Button Press Buzzer |
ON |
Function to sound a buzzer when a button is pressed. |
ON/OFF |
|
Emission Gas Sensor Shift |
Normal |
Function to change the sensitivity of the exhaust gas sensor. |
Much More/More/Little More/Normal/Little Less/Less/Much Less |
|
|