|
When auto-display mode is set, display does not change to appropriate screen even though vehicle speed exceeds display permission vehicle speed (approximately 12 km/h (7 mph) or less)
|
Master Cylinder Solenoid (Skid Control ECU)
|
|
|
CAN Communication System
|
|
|
Parking Assist ECU
|
|
|
When auto-display mode is set, display does not change from displayed screen even though vehicle speed is reduced to display permission vehicle speed (approximately 10 km/h (6 mph) or less)
|
Master Cylinder Solenoid (Skid Control ECU)
|
|
|
CAN Communication System
|
|
|
Parking Assist ECU
|
|
|
When auto-display mode is not set, display does not change from displayed screen even though operating main switch while within display permission vehicle speed (approximately 12 km/h (7 mph) or less)
|
Front and Side Monitor Main Switch
|
|
|
Harness or connector
|
|
|
CAN Communication System
|
|
|
Master Cylinder Solenoid (Skid Control ECU)
|
|
|
Parking Assist ECU
|
|
|
Side monitor image has irregular color, is distorted, or is not displayed (screen is black)
|
Check if DTC 5C-40 is output
|
|
|
Parking Assist ECU
|
|