Home Vehicle Exterior Door/Hatch POWER BACK DOOR SYSTEM
Last Modified: 11-27-2007 1.6 D
Service Category: Vehicle Exterior Section: Door/Hatch
Model Year: 2008 Model: LX570 Doc ID: RM000003EC3000X
Title: DOOR / HATCH: POWER BACK DOOR SYSTEM: CUSTOMIZE PARAMETERS (2008 LX570)

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Customize Setting /

(e) Select the setting by referring to the table below.

PSD & PBD Operation

Display

Default

Contents

Setting

PBD Power Operation

Valid

Makes power back door function ON or OFF

Valid/Invalid

PBD SW Operation

0.8 s

A function that turns the power back door closer switch on when the switch is pushed once or is held down for 0.8 sec.

0.8s/ON

PBD Buzzer

ON

A function that makes the power back door buzzer sound when the power back door is operating.

ON/OFF

Wireless PBD Operation

0.8 s

A function that operates the power back door when the transmitter switch is pressed in a specified way (1 time, 2 times, 0.8 sec. press, or off).

1 time/2 times/0.8 s/OFF