| Last Modified: 11-27-2007 | 1.6 F | |
| Service Category: General | Section: Specifications | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003ESB003X |
| Title: SPECIFICATIONS: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: SERVICE DATA (2008 LX570) | ||
SERVICE DATA
Skid Control Buzzer
|
Measurement Condition |
Specified Condition |
|---|---|
|
Battery positive (+) voltage → Terminal 2 |
Skid control buzzer sounds |
|
Battery negative (-) → Terminal 1 |
VSC OFF Switch
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
3 - 6 |
Pressed |
Below 1 Ω |
|
Not Pressed |
10 kΩ or higher |
CRAWL Switch
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
11 (ECU1) - 6 (E) |
Speed selector switch: MID |
10 kΩ or higher |
|
Speed selector switch: HI |
||
|
Speed selector switch: LO |
Below 1 Ω |
|
|
13 (ECU2) - 6 (E) |
Speed selector switch: MID |
10 kΩ or higher |
|
Speed selector switch: HI |
Below 1 Ω |
|
|
Speed selector switch: LO |
||
|
2 (HSW) - 6 (E) |
ON/OFF: Pressed |
Below 1 Ω |
|
ON/OFF: Not pressed |
10 kΩ or higher |
BRK LP Relay
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 4 |
Battery positive (+) voltage applied to terminal 1 and battery negative (-) voltage applied to terminal 2 |
10 kΩ or higher |
|
Battery positive (+) voltage not applied to terminal 1 and battery negative (-) voltage applied to terminal 2 |
Below 1 Ω |
|
|
3 - 5 |
Battery positive (+) voltage applied to terminal 1 and battery negative (-) voltage applied to terminal 2 |
Below 1 Ω |
|
Battery positive (+) voltage not applied to terminal 1 and battery negative (-) voltage applied to terminal 2 |
10 kΩ or higher |
|
|