|
Last Modified: 11-27-2007 |
1.6 G |
|
Service Category: Vehicle Interior |
Section: Lighting (int) |
|
Model Year: 2008 |
Model: LX570 |
Doc ID: RM000003FAE000X |
|
Title: LIGHTING (EXT): AFS OFF SWITCH: INSPECTION (2008 LX570) |
INSPECTION
1. INSPECT COMBINATION SWITCH ASSEMBLY
|
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection
|
Switch Condition
|
Specified Condition
|
|
1 (B) - 2 (IND)
|
AC main switch off
|
10 kΩ or higher
|
|
AC main switch on
|
Below 1 Ω
|
|
7 (MSW) - 6 (E)
|
AFS off switch off
|
10 kΩ or higher
|
|
AFS off switch on
|
Below 1 Ω
|
|
(b) Apply battery voltage to the connector, and check the LED illumination condition.
OK:
|
Measurement Condition
|
Specified Condition
|
|
Battery positive (+) → Terminal 4 (ILL+)
Battery negative (-) → Terminal 5 (ILL-)
|
LED illuminates
|
If the result is not as specified, there may be a malfunction in the combination switch assembly.
|