Home › Suspension › Suspension Control System › SUSPENSION CONTROL: ACCESS MODE SWITCH
Last Modified: 11-27-2007 1.6 G
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: LX570 Doc ID: RM000003GA7000X
Title: SUSPENSION CONTROL: ACCESS MODE SWITCH: INSPECTION (2008 LX570)

INSPECTION

1. INSPECT COMBINATION SWITCH ASSEMBLY (EASY ACCESS MODE SWITCH)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Switch Condition

Specified Condition

3 (ECU1) - 6 (GND)

Pushed and held

Below 1 Ω

Not pushed

10 kΩ or higher

If the result is not as specified, replace the combination switch assembly.