| Last Modified: 11-27-2007 | 1.6 G | |
| Service Category: Drivetrain | Section: Automatic Transmission/Transaxle | |
| Model Year: 2008 | Model: LX570 | Doc ID: RM000003GJB000X |
| Title: AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: PATTERN SELECT SWITCH: INSPECTION (2008 LX570) | ||
INSPECTION
1. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Switch Condition |
Specified Condition |
|---|---|---|
|
4 (P) - 3 (E) |
Pattern select (PWR) switch on |
Below 1 Ω |
|
4 (P) - 3 (E) |
Pattern select (PWR) switch off |
10 kΩ or higher |
|
2 (2ND) - 3 (E) |
Pattern select (2ND) switch continuously pressed |
Below 1 Ω |
|
2 (2ND) - 3 (E) |
Pattern select (2ND) switch released |
10 kΩ or higher |
If the result is not as specified, replace the No. 1 pattern select switch assembly.
|
|