BRAKE MASTER CYLINDER > REMOVAL

1. DISCONNECT CABLE FROM BATTERY NEGATIVE TERMINAL

2. REMOVE ABS MOTOR RELAY

3. REMOVE FRONT WIPER ARM RH

4. REMOVE FRONT WIPER ARM LH

5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH

6. REMOVE FRONT FENDER TO COWL SIDE SEAL LH

7. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

9. REMOVE COWL TOP PANEL SUB-ASSEMBLY OUTER

10. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY (RHD)

11. REMOVE RESERVOIR TUBE NO.1

12. REMOVE RESERVOIR TUBE NO.2

13. REMOVE FRONT DOOR SCUFF PLATE LH (LHD)

14. REMOVE FRONT DOOR SCUFF PLATE RH (RHD)

15. REMOVE COWL SIDE TRIM ASSEMBLY LH (LHD)

16. REMOVE COWL SIDE TRIM ASSEMBLY RH (RHD)

17. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER

18. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

19. REMOVE BRAKE PEDAL RETURN SPRING

20. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS

21. REMOVE BRAKE MASTER CYLINDER W/SIMULATOR ASSEMBLY (LHD)

22. REMOVE BRAKE MASTER CYLINDER W/SIMULATOR ASSEMBLY (RHD)