SHIFT LEVER > REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE SHIFT LEVER KNOB

3. REMOVE CONSOLE PANEL UPPER FRONT

4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER

5. REMOVE FRONT DOOR SCUFF PLATE LH

6. REMOVE FRONT DOOR SCUFF PLATE RH

7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

8. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

9. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER

10. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2

11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

12. REMOVE FLOOR CARPET COVER CENTER RH

13. REMOVE FLOOR CARPET COVER CENTER LH

14. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER

15. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY

16. REMOVE SHIFT LEVER