FRONT DRIVE SHAFT > REASSEMBLY

1. INSTALL FRONT DRIVE SHAFT BEARING

2. INSTALL FRONT DRIVE SHAFT RH HOLE SNAP RING

3. INSTALL FRONT DRIVE SHAFT DUST COVER

4. INSTALL FRONT DRIVE SHAFT DUST COVER LH

5. INSTALL FRONT DRIVE SHAFT DUST COVER RH

6. INSTALL FRONT DRIVE SHAFT LH HOLE SNAP RING

7. INSTALL OUTBOARD JOINT BOOT

8. INSTALL OUTBOARD JOINT BOOT NO.2 CLAMP

9. INSTALL OUTBOARD JOINT BOOT CLAMP

10. INSTALL FRONT DRIVE SHAFT DAMPER

11. INSTALL FRONT DRIVE SHAFT DAMPER CLAMP

12. INSTALL INBOARD JOINT SHAFT ASSEMBLY

13. INSTALL INBOARD JOINT BOOT

14. INSTALL INBOARD JOINT BOOT NO.2 CLAMP

15. INSTALL INBOARD JOINT BOOT CLAMP

16. INSPECT FRONT DRIVE SHAFT ASSEMBLY